Brewing Accessories

Stainless/Carbon Steel Dual Roller Three Roller Grain Malt Mill Alcohol Beer Wine Accessories home Brewing Equipments

  • Model:

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS


This Grain Mill is constructed using materials that will last a lifetime. Cold rolled steel for the rollers before, but now they are updated, stainless steel instead of cold rolled steel. 6061 Aluminum body and hopper and oil impregnated brass bushings. The grain mill is professional in grinding barley, wheat and other cereals. It is provided with adjustable 3- steel rollers which can be crushed cereal well and peeled shell off perfectly, so as to be good for brewing beer in future.

 

This equipment is perfect for large batches and high efficiency milling. With three rollers, all your grain will be crushed twice in one cycle. The initial crush is through the fixed gap between the top two rollers, and then the grain passes through the second gap between the drive roller and the adjustable bottom third roller. The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage.

 

The aluminum hopper can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible. A hand crank is included, but the mill can be easily motorized with a corded electric drill. You don't need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of .070". Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws. You will use the stainless steel brackets to set the mill over a grain bin or 5 gallon bucket.

 

Parameters:

Type: Grain crusher

3-steel rollers: Stainless steel

Grinder housing: Aluminum 6061

Hoppers: Aluminum 6061

Total height: 263mm

Hopper dimensions at top: 223 x 210mm

Footprint size of grinder: 150 x 75mm

Dimensions: 76 x 150 x 50mm

Steel Rollers: ø 28 x 127mm

Adjustable distance: 0,025 - 0,1 inch (0.635 - 2,54 mm)

Crank handle: 200mm

Package weight: 3350g

 

 

Features:

Width and roller diameter is optimized for use with power drill

Adjustable rollers at both ends to give uniform crush

12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an   excellent filter bed for sparging

6" long adjustable gap

Fully adjustable mill

0.060 fixed primary gap, 0-0.065 fully-adjustable secondary gap

Dual eccentric adjusters built from stainless steel for no galling

8 lbs / minute is average throughput

6" x 1.5" diameter steel rollers

Crankshaft can be turned clockwise or counterclockwise

Durable alloy frame

SAE 841 oil impregnated bronze bushings

Heavy-duty three-roller mill with adjustable secondary gap-spacing

Integral drive shaft and axles

Mill can be hand-cranked or motorized with a corded electric drill

You will need to supply or build a base

 

 

Package include:

1*MaltMill Included

4*pcs hoppers

1*pc crank handle

2*pcs stainless steel bracket

1*bag screws and 2pcs rollers


MetInfo enterprise content manager system | MetInfo CMS